Even with the latest dxf_outlines.py I still get 106.667mm when I export and re-import the DXF. I restarted Inkscape and tried the test with the 100mm100mm.svg you uploaded earlier. It is, however, several versions older than the latest version in the repo you linked to. I just checked, and it is the same as the dxf_outlines.py in the latest release source tarball on (except the shebang line). Ok, I searched and the only dxf_outlines.py on my machine is /usr/share/ inkscape/ extensions/ dxf_outlines. OpenSCAD also shows the rectangle as being 106.371mm on each side, so it seems that the exported DXF has the wrong size, which suggests that import is fine, but export is scaling things. To narrow down whether this was an import or export problem, I tried loading the DXF into OpenSCAD. Note that the imported rectangle is now 106.371mm on each side. Disable "Use automatic scaling to size A4", and set manual scale factor to 1.0. Import the exported DXF into the same drawing. Disable "use ROBO-Master" and "use LWPOLYLINE" (though I don't think either setting matters). Choose "Desktop Cutting Plotter (AutoCAD DXF R14) (*.dxf)" as the format. (I don't know if either of these are necessary to reproduce)Ĥ.
In Document Properties set the page size to something other than A4, and set the units to mm. > View this message in context: > Sent from the OpenSCAD mailing list archive at as "Desktop Cutting Plotter (AutoCAD DXF R14) (*.dxf)" seems to scale up the drawing by about 6%.Ģ. I keep the base units in mm to be consistent with OpenSCAD. > 7 - Make sure the ROBO-Master spline option is unchecked, LWPOLYLINE option > 6 - Save as Desktop Cutting Plotter (Autocad DXF R14). > (adjust the value based on granularity you need I use 0.3 or 0.1 for most
> 5 - Flatten Beziers: Extensions -> Modify Path -> Flatten Beziers > 4 - Convert to Path: Path -> Object to Path (Ctrl+Shift+C) Has anybody tinkered with getting openscad to take DXF files from inkscape? What steps did you use? I get the same set of errors as with the cookie cutter code, so I'm betting it has to do with the DXF file I'm creating, but I have no idea what to change. I've been following this tutorial to a T: and no dice even just getting it to extrude ten px using the code in the blog post. I'm pretty sure I'm missing something basic. I want to make some new cookie cutters, using the code here: but openscad keeps giving me errors about intersecting lines, and that doesn't make any sense to me because I'm literally going as simple as drawing a circle in inkscape, converting object to a path(so it becomes a square), selecting the edit paths by nodes tool, selecting the whole object, make selected segments lines, and exporting to dxf with LWPOLYLINE as type of line output. Hey guys, I'm having trouble getting Openscad to process DXF files I make in Inkscape.
0 kommentar(er)
